Purpose of this chipper - grinding stem wood, wood waste and the bush in the production of wood chips. Supplier of equipment for chipping MAZ-6944C9 has become a well-known German company JENZ GmbH Maschinen und Fahrzeugbau, based in the small town of petershagen (North Rhine-Westphalia).
Purpose of this chipper - grinding stem wood, wood waste and the bush in the production of wood chips. Supplier of equipment for chipping MAZ-6944C9 has become a well-known German company JENZ GmbH Maschinen und Fahrzeugbau, based in the small town of petershagen (North Rhine-Westphalia). The machine is equipped with a self-contained diesel engine Mercedes-Benz OM 471 LA power 490 HP. and therefore it has a high productivity - to 150 bulk meters3/h on shtepe.
The operating principle of the chopper Jenz: raw material is loaded arm on the output tray to the conveyor and delayed feed drive rolls in the cutting drum, where grinding occurs.
The maximum size of the loaded timber: softwood - 560 mm; solid - 420 mm. Infeed width of the window 1000 mm, height - 650 mm.Podayuschy mechanism (and conveyor rollers) equipped with an automatic adjustment of feed depending on the loading of the drive motor. The cutting drum has 20 knives, but can operate with less of kolichestvom.Udalenie chips from the cutting mechanism occurs through a special device, which can change the height and direction of ejection. The height of the discharge chute - no less 4 m. The maximum length of the fiber produced chips - from 35 to 100 mm (size is adjusted by replacing the separator grid and changing the number of blades on the drum).Location of the feeding table - lateral, right direction of the car. In the transport position the table is raised vertically upwards, providing desired road machine gabarit.Dlya service chipper unit serves to lift cabin hydromanipulator, which is mounted on the chassis behind the cab. Specifications : the maximum load moment - 75 kNm; maximum outreach - 8,6 m; capacity (helpful) at maximum reach - 620 kg; the rotation angle in the horizontal plane - 390 city. You can control the basic functions of chipping unit with function keys on the control joysticks hydromanipulator.
Chipper designed for the shift operation, and can work successfully in a temperature range of from -40 ° C to + 40 ° C. It is equipped with automatic cleaning systems radiators and collecting material losses, and centralized lubrication system; provided the presence of lights illuminate the work area.
The cost of the service for crushing firewood and sawmill waste is calculated individually, depending on the volume of work and the location of the crushing point and is approximately from 9 rubles per square meter when working within the city of Vitebsk.